This 3M full face asbestos respirator kit is the simple, one stop solution to help provide respiratory protection during most asbestos abatement activities such as vacuuming, sanding, removal and disposal. The 3M full face respirator helps protect against eye-irritating mold. Provides a wide field of vision for enhanced safety.
When properly fitted, use in a variety of applications including exposure to lead and asbestos abatement for concentrations up to 50 times the Permissible Exposure Limit (PEL). Full face respirators must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are immediately dangerous to life or health (IDLH).
The new 3M 7093 P100 filter provides up to 25% improvement in breathing resistance. Innovative solid-top air-inlet design does not require tape during showering or decontamination. Solid-top design keeps debris out of the airflow channel, reducing the chance of premature clogging. Do not use in environments that are immediately dangerous to life or health (IDLH). Replacement cartridges available.